LiPo (2s/3s) Balance Battery Charger

• Charge LiPo (Lithium Polymer) Batteries 2s-3s (LiPo 7.4v - 11.1v)

• 100v-240v AC Power Input

• Fitted EU Plug with UK Adapter provided

• Charge Current (1.2A) – charges a 75% depleted 1450mAh LiPo battery in 1 hour

• LEDs indicate Charging Status for Cell 1, Cell 2 & Cell 3

The LiPo (2s/3s) Balance Battery Charger will charge Lithium Polymer batteries with 2s-3s (7.4v - 11.1v), ideal for Airsoft and other hobby enthusiast such as model/ RC cars etc… Power the charger with the lead provided and connect your LiPo battery via its balance lead to initiate charging. Indicators on the charger will show the status of each LiPo cell, charging or fully charged. With a charge current of 1.2A, you can expect a 1450mAh battery that only has 25% charge remaining to be fully charged in approximately one hour.

What is in the box?

(x1) Lipo (2s/3s) Balance Battery Charger

(x1) EU Power Lead + UK Plug Adapter

(x1) Instruction Manual

LiPo Safe Use Warning

WARNING – Strict instructions must be followed to ensure the safe use of Lithium-Polymer Cell batteries.

1. Use a LiPo Balance Charger ONLY!

2. Ensure the Balance Lead is connected when charging.

3. Always use a Fire-Retardant LiPo Charging Bag when Charging Battery.

4. Never leave LiPo Batteries charging unattended.

5. Always check cell voltages before and after charging - Minimum Cell Voltage (3.3v), Maximum Cell Voltage (4.2v).

6. Maximum Charing Current of 3C.

7. In the event that Battery Cells show signs of swelling/ expansion or the surface temperature is in excess of 70°c you must disconnect and stop using the battery. Failure to comply may result in the rapid venting of the battery cells which can lead to fire and explosions.