LiPo Battery 1450mAh 11.1v 30c (STK|Deans)

NUPROL POWER

The batteries found in Nuprols “NP POWER” range have been specifically designed to support the hobby-enthusiast sectors that include Airsoft, RC Models & UAVs.

With well over 100 variants in the range from small 300mAh HPA batteries through to the massive multi-rotor UAV 16,000mAh power houses, all batteries utilise modern battery-cell technology and undergo excessive quality-control checks to deliver first-class performance time and again.

• High Quality Silicone Leads
• Modern Battery Cell Technology
• ISO 9000 Quality Control Manufacturing Facility
• Shipped at optimal charge of ≥60%

LIPO – LITHIUM POLYMER

Lithium Polymer batteries have established themselves as the go-to battery chemistry for the modern hobbyist industries. LiPo batteries have a very high energy density, meaning more stored energy vs its size/ weight. This allows for more powerful batteries with long charge times able to be fitted to models/ replicas where space & weight are at a premium.

• The lightest rechargeable battery technology vs its capacity
• Very High discharge rates for devices requiring rapid bursts of energy
• A low self-discharge rate when in storage (approx. 5-10% per month)
• Fast recharge times

NOTE: LiPo batteries must be treated with care and attention. Any damage can cause the battery cells to swell/ overheat and must be disposed of. Special care must be taken when storing & charging LiPo batteries – always use a Fire Retardant Charging Bag when charging and for long-term storage.

LiPo Safe Use Warning

WARNING – Strict instructions must be followed to ensure the safe use of Lithium-Polymer Cell batteries.

1. Use a LiPo Balance Charger ONLY!
2. Ensure the Balance Lead is connected when charging.
3. Always use a Fire-Retardant LiPo Charging Bag when Charging Battery.
4. Never leave LiPo Batteries charging unattended.
5. Always check cell voltages before and after charging - Minimum Cell Voltage (3.3v), Maximum Cell Voltage (4.2v).
6. Maximum Charing Current of 3C.
7. In the event that Battery Cells show signs of swelling/ expansion or the surface temperature is in excess of 70°c you must disconnect and stop using the battery. Failure to comply may result in the rapid venting of the battery cells which can lead to fire and explosions.